The READIN Family Album
Sylvia's on the back (October 2005)

READIN

Jeremy's journal

At first I didn't quite know what I would do with the book, other than read it over and over again. My distrust of history then was still strong, and I wanted to concentrate on the story for its own sake, rather than on the manuscript's scientific, cultural, anthropological, or 'historical' value. I was drawn to the author himself.

Orhan Pamuk


(This is a page from my archives)
Front page
More recent posts
Older posts
More posts about:
Window seat
Home improvement
Projects

Archives index
Subscribe to RSS

This page renders best in Firefox (or Safari, or Chrome)

🦋 About molding

More window seat stuff. (The seat is completed and primed; it will not be painted until sometime this coming spring when we repaint the room. Pictures coming soon.) I wrote before about building the baseboard, which came out very well and looks great in the context of the room; the second molding I build, which is an apron under the "sill" at the front of the seat, was less successful, and I want to examine why, and what remedial steps I can take.

First an explanation of what I was going for. Behind the seat are three windows, each with a sill and an apron molding beneath the sill. ("Apron" is the stepped molding which transitions from the sill to the wall.) I wanted to echo this by having the seat top jut out beyond the seat front, and have an apron beneath it. My plan was, to make it jut out by the same amount the window sills project from the wall, and duplicate the measurements of the existing aprons. (Note: this is quite different from the plans I originally posted here back in June.) The dimensions in place (roughly): Window sills come out 2 1/2" from the wall; aprons extend 7" below the sills and come out 1 1/2" from the wall at the top of the apron, 3/4" at the bottom.

What I ended up with below the top of the seat is about the same; but it does not look quite right. The reason it does not, as I realized over the course of the past few days, is that the shadows are wrong. The purpose of the apron molding is to make a visual transition from the window sill to the wall; how this is done is by shadows falling where the apron depth changes. The apron I built is located diffently with respect to the light sources, and the shadows are not right. (Well two of them are.) I am going to leave it be for the time being, but eventually I think this could be corrected by making it deeper -- adding pieces in front of it. If I ever actually get around to this I will lay it out beforehand with a diagram of light sources to see what the shadows would end up looking like, before I start cutting.

posted afternoon of Wednesday, October 8th, 2003
➳ More posts about Window seat
➳ More posts about Home improvement
➳ More posts about Projects

Respond:

Name:
E-mail:
(will not be displayed)
Link:
Remember info

Drop me a line! or, sign my Guestbook.
    •
Check out Ellen's writing at Patch.com.

Where to go from here...

Friends and Family
Programming
Texts
Music
Woodworking
Comix
Blogs
South Orange
readinsinglepost