🦋 Who protects children and dumb carpenters
I want to tell a story about the work I did today on the shoe rack I had previously built -- and think I should make clear beforehand what I have in mind, so that I don't bog down in details. My basic points here are, that I succeeded in the task I took on largely through dumb luck; and that I ought, when I noticed that my initial design would not be an adequate solution, more thoroughly to have investigated the alternatives available. The problem was, I wanted to bolt my shoe rack to the wall, since it is tippy and hard to avoid jostling against. However there is an obstacle at floor level which prevents the rack from backing up hard against the wall. Initially I thought this obstacle was the saddle in the door to the left of the rack, and my plan was to cut a square out of the back of the left leg so that it would go around the saddle. But when I took the rack away from the wall, I noticed that there was also a baseboard, which started about where the saddle left off, on the right side of the rack. My immediate thought was, I'll just cut a similar square out of the back of the right leg; I took the rack downstairs and got ready to do it. But I noticed when I was laying out the cuts, the baseboard is too high; it will butt up against the bottom rail of the rack and keep it from going flush with the wall. More quick thinking; I decided to cut a mortise out of the back of the rail, to fit the baseboard. This is where I think I goofed; if I had been thinking more clearly, I would have just taken the baseboard off the wall. As it was, I made the mortise -- it took only about an hour -- and it is testament to the solidity of my joinery that the rack was able to take all that force without racking or breaking. But it is not an ideal solution -- the rack is now permanently wed to its current location, among other hassles.
posted evening of Sunday, June 8th, 2003
➳ More posts about Shoe rack
➳ More posts about Woodworking
➳ More posts about Projects
|
