|
|
Wednesday, October 8th, 2003
More window seat stuff. (The seat is completed and primed; it will not be painted until sometime this coming spring when we repaint the room. Pictures coming soon.) I wrote before about building the baseboard, which came out very well and looks great in the context of the room; the second molding I build, which is an apron under the "sill" at the front of the seat, was less successful, and I want to examine why, and what remedial steps I can take. First an explanation of what I was going for. Behind the seat are three windows, each with a sill and an apron molding beneath the sill. ("Apron" is the stepped molding which transitions from the sill to the wall.) I wanted to echo this by having the seat top jut out beyond the seat front, and have an apron beneath it. My plan was, to make it jut out by the same amount the window sills project from the wall, and duplicate the measurements of the existing aprons. (Note: this is quite different from the plans I originally posted here back in June.) The dimensions in place (roughly): Window sills come out 2 1/2" from the wall; aprons extend 7" below the sills and come out 1 1/2" from the wall at the top of the apron, 3/4" at the bottom. What I ended up with below the top of the seat is about the same; but it does not look quite right. The reason it does not, as I realized over the course of the past few days, is that the shadows are wrong. The purpose of the apron molding is to make a visual transition from the window sill to the wall; how this is done is by shadows falling where the apron depth changes. The apron I built is located diffently with respect to the light sources, and the shadows are not right. (Well two of them are.) I am going to leave it be for the time being, but eventually I think this could be corrected by making it deeper -- adding pieces in front of it. If I ever actually get around to this I will lay it out beforehand with a diagram of light sources to see what the shadows would end up looking like, before I start cutting.
posted afternoon of October 8th, 2003: Respond
➳ More posts about Home improvement
|  |
Thursday, October 23rd, 2003
Developed pictures of the two projects I have finished recently:
posted evening of October 23rd, 2003: Respond
➳ More posts about Projects
| |
Wednesday, April 14th, 2004
I have not blogged about woodworking for a long time because, well, I have not been doing any of it. But I am hoping to change that. A couple of nights this week I was in the basement, working on Ellen's bookcase -- she has given me a deadline of September to finish it or she buys one, and I believe I can do it. Also I got the garage cleaned out and have made some stabs towards planning the workbenches I want to build in there. In other home improvement news, Ellen is repainting the sitting room and boy, does it look good! (This is the room where I built in my windowseat, and it has looked funny unpainted ever since.) The color scheme is: sage green walls, bone white trim and doors and ceiling. There is a lot of trim in the room, doing it all took nearly two weeks (of quite intermittent painting). The walls and ceiling are going a lot faster. When she finishes I will put the final bit of molding on the windowseat (a cove between the top of the seat and the wall behind it) and put shades on the windows, and the room will get more use than it had in the past -- our plan is to have that be our general room for congregating in the evenings, instead of our bedroom.
posted evening of April 14th, 2004: Respond
➳ More posts about Bookcase
| |
|
Drop me a line! or, sign my Guestbook.
•
Check out Ellen's writing at Patch.com.
| |
